eo_logo
 
Product added to cart
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. TECHSPEC®組件由愛特蒙特光學設計、指定或製造。進一步瞭解

桿式反射鏡 - 寬頻電介質膜

×
  • 桿式設計可在安裝時減少反射鏡表面承受的應力
  • 在寬波長範圍內平均反射率>99%
  • 表面質量 20-10,0-45°入射角
  • 另有 TECHSPEC® 雷射 和 金屬鍍膜 版本可供選擇

一般規格

Compatible Kinematic Mount:
Diameter (mm):
25.00 +0.00/-0.10
Back Surface:
Commercial Polish
Clear Aperture (%):
90.00
Edges:
Ground, protective bevel as needed
Thickness (mm):
13.00 ±0.20
Stem Diameter (mm):
12.50 +0.00/-0.10
Stem Length (mm):
6.50 ±0.20
Surface Flatness (P-V):
λ/10
Substrate:
Fused Silica (Corning 7980)

產品

Dia. (mm)  Surface Flatness (P-V)   Coating Specification   Coating   Thickness (mm)   比較   庫存號碼   價格  Buy
25.00 λ/10 - Uncoated 13.00 #14-577 Clearance NT$4,340 Qty 6+ NT$3,465   Request Quote  
  • 5-7 Days
    ×
 
25.00 λ/10 Ravg ≥98% @ 340 - 488nm (0°, All Polarizations)
Ravg ≥98% @ 320 - 450nm (45°, All Polarizations)
Ravg ≥99% @ 320 - 450nm (45°, S-Polarization)
Dielectric Mirror (320-450nm) 13.00 #16-732 Clearance NT$6,125 Qty 6+ NT$4,900   Request Quote  
  • 5-7 Days
    ×
 

產品概覽

TECHSPEC® 寬頻電介質膜桿式反射鏡為高性能、寬頻電介質鍍膜的反射鏡提供較低的安裝應力和出眾的反射率。設計用於安裝在 TECHSPEC®的 可調圓形光學鏡座 和 E系列動態光學鏡座上,反射鏡和動態鏡座之間的所有接觸均透過鏡片的桿來進行,從而減少了反射鏡光學表面承受的應力。與傳統安裝的λ/10平面反射鏡相比,這些反射鏡由於採用了減少應力的設計和單片熔融石英結構,因此具有更優異的熱穩定性及更高的表面平整度。這些電介質膜反射鏡具有大於99%的反射率和20-10的表面質量,其性能明顯優於金屬鍍膜反射鏡,並可減少能量損失和散射來提高系統性能。TECHSPEC® 寬頻電介質膜桿式反射鏡的波長範圍很寬,可輕鬆安裝和整合到光學系統中,是紫外光譜到近紅外光譜的高功率光束轉向應用的理想選擇。

注意: 如有客製需求,請聯絡我們。

Technical Information

A comparison of the aberrations introduced to a λ/10 Stemmed Mirror and a λ/10 First Surface Mirror when mounted in a kinematic mount. As shown, a Stemmed Mirror stays within λ/10 specification up to 12 inoz of torque (“hand-tight”) while a First Surface Mirror becomes out of specification with a surface flatness of λ/5.
A comparison of the aberrations introduced to a λ/10 Stemmed Mirror and a λ/10 First Surface Mirror when mounted in a kinematic mount. As shown, a Stemmed Mirror stays within λ/10 specification up to 12 inoz of torque (“hand-tight”) while a First Surface Mirror becomes out of specification with a surface flatness of λ/5.
Stemmed Mirrors are mounted to kinematic mounts by a stem on
their back surface, resulting in no contact with the edges of the
mirror surface.
Stemmed Mirrors are mounted to kinematic mounts by a stem on their back surface, resulting in no contact with the edges of the mirror surface.

Accessories

Title 比較庫存號碼  價格 Buy
12.5/12.7mm Optic Dia., Kinematic Mount, 3-Screws #58-853 NT$3,360 Qty 5+ NT$3,024   Request Quote
  • 聯絡我們
    ×
12.5/12.7mm Optic Dia., E-Series Kinematic Mount #15-865 NT$1,383 Qty 10+ NT$1,316   Request Quote
  • 5-7 Days
    ×

相關產品

 
Sales & Expert Advice
 
or view regional numbers
Easy-to-Use
QUOTE TOOL
enter stock numbers to begin
This site is protected by VikingCloud's Trusted Commerce program