eo_logo
 
Product added to cart

托架和齒輪調整臺

X-Axis Metric Stages

X-Axis Metric Stages X-Y Axis Metric Stages X-Y-Z Axis Metric Stages Z-Axis Metric Stage +4
×
  • 鋁質調整臺,使用黃銅托架和齒輪
  • 調整旋鈕旋轉一圈,會位移20mm
  • 標尺增量為1mm,具鎖緊桿
  • Basic Rack and Pinion Stages Also Available

一般規格

Note:
With locking lever
Guide System:
Dovetail
Construction:
Rack and Pinion: Brass
Stage: Aluminum
Travel Per Knob Rotation (mm):
20
Type of Drive:
Rack and Pinion

產品

 Type of Movement   Type of Drive   Type   Travel (mm)   Resolution (mm)   Center Hole   比較   庫存號碼   價格  Buy
Linear (X) Rack and Pinion Metric 30 (±15) 0.1 None
Linear (X) Rack and Pinion Metric 60 (±30) 0.1 None
Linear (X) Rack and Pinion Metric 100 (±50) 0.1 None
Linear (X-Y) Rack and Pinion Metric 30 (±15) 0.1 None
Linear (X-Y) Rack and Pinion Metric 60 (±30) 0.1 None
Linear (X-Y-Z) Rack and Pinion Metric 60 (±30) in X and Y
40 (±20) in Z
0.1 None
Linear (X-Y-Z) Rack and Pinion Metric 30 (±15) in X and Y
40 (±20) in Z
0.1 None
Linear (Z) Rack and Pinion Metric 40 (±20) 0.1 None
Linear (X-Z) Rack and Pinion Metric 60 (±30) in X
40 (±20) in Z
0.1 None
Linear (X) Rack and Pinion Metric 60 (±30) 0.1 M16 x 1
Linear (X-Y) Rack and Pinion Metric 60 (±30) 0.1 M16 x 1

產品概覽

托架和齒輪調整臺特別適合要求承載高負荷、高精度以及大行程距離的多種應用。托架和齒輪調整臺提供一系列位移軸。

注意:使用120mm x 70mm公制底座(#54-977)來將托架和齒輪調整臺安裝到實驗板。Z軸直角支撐架可與支援Z軸位移的調整臺結合使用。

Technical Information

Accessories

Title 比較庫存號碼  價格 Buy
M6 Post Holder with Male Stud #64-374 NT$2,188 Qty 10+ NT$1,943   Request Quote
  • 5-7 Days
    ×
¼-20 Post Holder with Male Stud #64-375 NT$2,188 Qty 10+ NT$1,943   Request Quote
  • 5-7 Days
    ×
½" Diameter Post Holder #64-376 NT$1,960 Qty 10+ NT$1,743   Request Quote
  • 5-7 Days
    ×

相關產品

 
Sales & Expert Advice
 
or view regional numbers
Easy-to-Use
QUOTE TOOL
enter stock numbers to begin
This site is protected by VikingCloud's Trusted Commerce program